Equipments and maintenance

APT Services

APT design, install and maintenance your firefighting equipment

We offer customized and integrated safety solutions. Choosing Apt Safety Group means relying on a competent and reliable partner who knows how to protect your company from fire hazard.

Engineering & design

An established experience in serving the market

Apt Safety Group has designed, installed and maintained fire prevention systems of all types in the widest range of industries over the last forty years. Our technical office department support the customer in choosing the best solutions, from technical and economic point of view.

Testing and Training Center where risk scenarios are reproduced every day and safety techniques and technologies are tested enriches the know-how of our consultants, designers, and maintainers
Their expertise in the most challenging areas of industrial firefighting, aviation, maritime and off-shore installations, brought back to the training center, allows our training to be strongly linked to the realities the trainees will face.

We experience the entire life cycle of systems

By integrating the design, installation and maintenance phase with the educational and training phase that sets us apart, we can act on all aspects of the Fire Management Systemorganically, choosing the best combination of solutions for the customer’s needs.

Our plant design, we are not only able to offer all the plant solutions for fire detection, control and extinguishing, in accordance with current, national and international reference standards and legislations-UNI, NFPA, FM-but we make the customer’s goal our own: to optimize the effort according to the risk.

A long experience serving the market

Apt Safety Group with its Plant Design services, starts from the identification of the most suitable type of system to be used, developing all the project phases, (Preliminary, Detailed and Executive) regarding all the plant solutions for fire detection, control and extinguishing, in accordance with the current regulations and legislations, national and international reference such as UNI, NFPA, FM, which are constantly monitored to offer its customers up-to-date solutions.

We carry out feasibility studies, technical reports, computerized hydraulic calculations, detailed technical and computometric specifications that define spending budgets, necessary for the client to best define their investments.

Equipments

We install fire equipment and safety systems

A sprinkler system must work at the time of a fire, but how can you be sure that this will happen?

Regulations impose design criteria that ensure that this happens, but when the scenario becomes complex, having a test field like ours, where we can simulate the operation of systems, offers a powerful weapon in firefighting.

Apt ‘s experience in the chemical, pharmaceutical, off-shore and maritime fields attest to our organization’s ability to be able to guarantee the effectiveness of the installed fire detection and extinguishing systems and to ensure their regulatory and legislative compliance through proper practices and the preparation of all necessary documentation even in extremely challenging contexts.

''Turnkey'' Service

Comprehensiveness of service is our strength. From the earliest stages Apt Safety Group provides comprehensive and targeted advice to entities subject to fire prevention inspections.

With our Plant Design services, we can develop all project phases for fire control and firefighting and integrate with all necessary detection system solutions.

We conduct feasibility studies, technical reports, computerized hydraulic calculations, detailed technical and computometric specifications.

Through its Business Network We guarantee ”Turnkey” service to many customers spread all over the country and in many international locations, including Off-Shore installations.
Each of our constructions complies with current national and international reference standards and legislations – UNI, NFPA, FM – and is accompanied by all structural fire resistance and fire plant efficiency certifications necessary to complete the authorization process for the issuance of the Fire Prevention Certificate.

Types of installed systems

Apt Safety Group performs, with its competent and qualified installers, the installation and/or revamping of all types of fire and security systems/systems, offering, thanks to its Business Network, a “Turnkey” service for the realization of:

Hydrant Network
Pumping Groups & Water Reserves
Water Systems – Sprinklers (Dry, Wet, Preaction)
Water Systems – Deluge
Sistemi ad acqua – Water Mist
Foam systems (Low, Medium and High Expansion)
Gaseous extinguishing agent systems (HFC, HCFC, Inert, CO2, Novec, etc.).
Smoke, flame, gas, temperature detection systems, etc.
Emergency lighting systems, emergency lights
EVAC evacuation systems

Service and maintenance

However far you may go, we will be by your side

Apt Safety Group performs through its competent and qualified maintenance technicians all the periodic inspections, required by the specific sector technical regulations, in accordance with what is indicated within the D.Lgs. 81/08.

The company is also a member of the UMAN Maintenance Group of the ANIMA Association and has certified its maintenance personnel in accordance with the requirements of the Control Decree dated 01.09.2021 at its own training center recognized as a Training Venue and Examination Venue by the National Fire Department, and through its personnel carries out, in accordance with all the time deadlines stipulated in the technical regulations, the maintenance of:

Types of systems maintained

UNI 9994 – Portable and wheeled fire extinguishers
UNI 10779 – Hydrant Network
UNI 671-3 – Hydrant Network Components, (Fire hoses, hose reels, sectioning valves, etc.).
UNI 11473.1 – Fire Doors
UNI EN 179 / UNI EN 1125 – Escape routes with associated quick release devices
UNI 9494.1 – HSES smoke and heat evacuators
UNI CEI 11222 – Stand-alone and centralized emergency and safety lighting systems
UNI 12845 / UNI 11292 – Pump Units Including Diesel Engine Service
UNI 12845 – Above ground water reserves
UNI 12845 – Water Systems – Sprinklers (Dry, Wet, Preaction)
UNI CEN/TS 14816 / NFPA-25 – Water Systems – Deluge
UNI CEN/TC 14972 / NFPA 750 – Water Systems – Water Mist
UNI EN 13565.2 / NFPA-25 / NFPA-11 – Foam systems (Low, Medium and High Expansion)
UNI-EN 15004-1 / UNI 11280 – Gaseous extinguishing agent systems (HFC – HCFC – Inerti – CO2 – Novec – etc.)
UNI EN 9795 / 11224 – Systems Detection of smoke, flame, gas, temperature, etc.
UNI ISO 7240 – EVAC evacuation systems
CEI 79-3 Intrusion and video surveillance systems CCTV
UNI EN 529 / UNI 11439 / UNI EN 365 – PPE 3rd Category (SCBA, fall arrest devices, etc.).
Instructions Provided by Manufacturer – Foam mixing equipment (Premixers, positive displacement pumps, etc.).
Instructions Provided by Manufacturer – Foam forming devices (Generators, Branches, Nozzles, etc.).
Instructions Provided by Manufacturer – Fixed and automatic ground and elevation monitors on pole on wagon etc.

Fire Prevention & ICC

We guarantee comprehensive and targeted counseling with reference to Presidential Decree Aug. 01, 2011 no. 151 to all companies subject to fire prevention controls falling under Category A, B, C Activities for the submission of the Certified Declaration of Commencement of Activity (SCIA).

The company with its Fire Protection Professionals – licensed and registered in the ministerial list ex L. 818/84 – offers comprehensive and targeted support for the choice of the best technical/economic solutions in accordance with current regulations, good engineering standards and no less than the interests of the client.

We are able to offer appropriate technical support for the issuance of structural fire resistance and/or fire protection system efficiency certifications necessary to complete the SCIA process and obtain the Fire Prevention Certificate.

The approach is based on the achievement of certain levels of safety cast in the specific performance (performance) that the building must demonstrate for the performance of the specific business activity and in the needs of the building user.

This methodology can find wide application on structures with any degree of complexity,from the simplest single room to the high-rise building where businesses with very different uses reside, to buildings of special historical and cultural value.

Fire Safety Engineering Approach

Fire Safety Engineering can be defined as the engineering approach related to theAnalysis of fire evolutionary dynamics through computational models fluid dynamics (CFD).

It allows the simulation of the fire event applied in a targeted manner to the activity studied through the definition of all possible boundary conditions and the evaluation of all parameters suitable for verifying the actual levels of performance required and the identification of procedures/interventions to be adopted in order to achieve the set safety standards.

Application of the engineering approach includes studies of Life Safety, reconstruction of the natural fire curve as well as Fire Investigation and Fire Resistance (fire resistance of structures).

Thanks to the new simulators, test center laboratories and the ‘Fire Safety Engineering (FSE) engineering-performance approach, which is based on the actual simulation of fire through the application of suitable calculation models, we have taken the opportunity to innovate techniques, methodologies and tools in the field of fire prevention that allow us to identify the best adoptable solutions in the plant engineering field.

The solutions identified appear to be specific to the case study, resulting in economic benefits for the adjustment Of the activity by the client to the canons of fire safety engineering.

Certifying safety

Fire prevention and ICC

Activities considered medium and high risk (categories B and C) are compulsorily subjected to Fire Prevention Certification (CPI) at the design stage, according to Presidential Decree 151, which certifies their implementation of fire safety regulations.

What activities are subject to the Fire Prevention Certificate?

Category A - Low-risk activities

For this type of activities, it is not mandatory to ask the fire brigade to evaluate the project, and their inspections are carried out on a random basis; the owner of the activity can request the issuance of the technical inspection report; these are activities with a “technical rule” with a limited level of complexity.

Category B - Medium risk activities

It is compulsory to request project evaluation from the Fire Department; inspections are carried out on a random basis and the owner can request the issuance of the report; activities included in Category A are activities with a “technical rule” but with a higher degree of complexity, or without a “technical rule.”

Category C - High-risk activities

For these activities, it is mandatory to ask the Fire Department to assess the project; their inspections are mandatory and are functional for the issuance of the ICC; these are activities with a high level of complexity, regardless of the presence or absence of a “technical rule.”

Do you want to protect your business from fire risk?

Request information now and learn how Apt Safety Group can help you design, install and maintain the fire suppression system best suited to your needs.

Thanks to our 40 years of experience, we can offer you a complete and customized turnkey service that complies with current regulations and legislation.